"The motherboard can be configured for either RAID 0, 1, 5, or 10. I set it up to use RAID 0 for speed, and to live life on the very edge! Thankfully, the configuration for RAID is pretty simple. You need to go into the BIOS first and set the SATA ports to operate in RAID, and then reboot into the RAID controller settings (CTRL + i), but it’s fairly seamless. Unfortunately, the instructions manual does not state any of this, so you might be stuck scratching your head."
Any major computer upgrade generally requires a full software reinstall too. No so if you heed the advice in the guide to Upgrading a Motherboard without Reinstalling. PCSTATS Tips