|
 |
MSI GeForce GTX 465 Twin Frozr II Overclocked |
| Fri, July 09 2010 | 12:00PM | PermaLink |
Feedback? |
|
"It was only going to be a matter of time ‘till we had the ability to adjust the voltage on the GTX 465 core. The introduction of the MSI version of the card along with the latest version of Afterburner brought that feature to the party. The thing is we've already looked at overclocking the 465 and been very impressed with it. And while MSI said I should be able to achieve a certain speed when it came to bumping up the voltage, I did become "ye' of little faith", because the number they said I should be able to get just seemed astronomical.
Let me just give you a few numbers to start with. At default the core on the GTX 465 is 608MHz and when it came to overclocking the Galaxy we managed to achieve a clock of 725MHz without the ability to adjust the voltage. Without giving too much away, all I can say before we get into the next page is that if we couldn't get much more than the 725MHz we already achieved, I wouldn't have bothered writing this article."
|
 |
FULL STORY @
Archived from OVERCLOCKED
http://mailbot.tweaktown.com/cgi-bin/dada/mail.cgi/r/TweakTown_News/h/20100707111241/www.tweaktown.com/reviews/3386/msi_geforce_gtx_465_twin_frozr_ii_overclocked_w_voltage_adjustment/index.html/
CURRENT Video Cards News on PCSTATS
|
|
|
Delock 2.5in External Enclosure w/Power over eSATA |
| Tue, May 26 2009 | 5:27PM | PermaLink |
Feedback? |
|
The design is pretty standard, aside from the obvious eSATA port there is an additional USB port and external power port. Since I haven't upgraded to the latest and greatest I7 chip and board yet I don't have a powered eSATA port. Chances are most regular consumers haven't either, therefore in order to take advantage of the eSATA capabilities; I needed to plug in a USB cable to provide power. . .
|
 |
FULL STORY @
Archived from BCCHARDWARE
http://www.bcchardware.com/index.php?option=com_content&task=view&id=7155&Itemid=40
CURRENT Hard Drives News on PCSTATS
|
|
|
|
 |
|
|
 |
06 / 20 / 2013 | 12:44AM
|
|