 |
ASUS P6T6 WS Revolution X58 Motherboard |
|---|
| Wed, May 13 2009 | 4:01PM | PermaLink |
Feedback? |
|
"When X58 was first announced there were rumours about its graphics card support. Would it get SLI approval from NVIDIA and would it still support Crossfire? - Originally NVIDIA specified that X58 would need to use an nForce 200 PCIe bridge chip to run SLI, but a lot of pressure was put on NVIDIA from all of the motherboard companies and SLI support was granted to X58 through a native setup allowing two or three cards. However, Intel’s 3-way SLI still requires a 16/8/8 setup; not the fastest out there, but still good enough. NVIDIA still recommended its nForce 200 chipset for best performance SLI.
To this end ASUS has finally produced its first X58 board paired with the nForce 200 chip. This has given ASUS the ability to provide the board three PCI Express x16 slots as well as three extra x16 slots in a variety of modes, which we will explain later."
|
|
FULL STORY @
Archived from TWEAKTOWN
http://www.tweaktown.com/reviews/2745/asus_p6t6_ws_revolution_x58_motherboard/index.html
CURRENT Motherboards News on PCSTATS
|
|
|
|
Zalman VF3000N GPU Cooler |
|---|
| Tue, September 07 2010 | 8:22PM | PermaLink |
Feedback? |
|
The summer might be about over, but the need to keep our graphics cards cool is one that never goes away. To help make sure that our GTX 200 cards are running at their best, Zalman has released the VF3000N cooler. It offers an abundance of fins and copper, a lot of room for airflow, and a surprisingly easy installation process.
|
|
FULL STORY @
Archived from TECHGAGE
http://techgage.com/article/zalman_vf3000n_gpu_cooler/
CURRENT Cooling / Heatsinks News on PCSTATS
|
|
|
|
|
RSS Newsletter