CNPS9500 AM2 heatsink is compatible with all current AMD Athlon64 processors,
and in particular the just introduced AMD 940-pin AM2 processor and socket
AM2 heatsink retention frame. As this is the very first socket AM2
(aka socket M2) heatsink to enter the FrostyTech test labs, we'll be touching upon the critical differences between socket
AM2 and socket 754/939/940 heatsinks in just a moment.
CNPS9500 AM2 heatsink is identical in materials and size to previous CNPS9500-series
heatsinks, but since this cooler is being launched in
conjunction with the nVidia nForce 500-series chipset, it has received a few
special touches. The Zalman CNPS9500 AM2 is a full copper heatsink, except its
surface has been brightly chrome plated to give it that nuclear winter, Terminator 2
android feel. The heatsinks' 92mm fan is internally illuminated with a pair of nVidia
green LEDs, which create a very spectacular light effect when the clear frosted
fan blades spin at full speed inside a darkened case.
heatsink is voluminous in size and weighs about 530grams, but it's designed to operate
quietly and coolly under low noise, low fan-speed conditions. The Zalman
FanMate2 fan speed controller is used to tweak the fan from an audible
2600RPM, right through to the virtually silent fan speed of 1350RPM.
| Zalman CNPS9500 AM2
| Model No.: CNPS9500 AM2|
|Materials: Chrome plated copper base, heatpipes and fins.|
| Fan Mfg: Zalman ZM7GL|
|Fan Spec: 1350-2600RPM, 12V, 0.35A|
|Fan Dim: 25x92x92mm|
|Heatsink & Fan Dim: 112x126x85mm |
| Weight: 530 grams|
|Includes: Fanmate 2 and mounting clip, thermal
Compatible with Sockets: 754/939/940/AM2
|Est. Pricing: $50USD
The Zalman CNPS9500 AM2 heatsink is framed
around three copper heatpipes bent into a figure-eight form, with about a
hundred 0.2mm copper fins attached at regular intervals to entirely surround
the spinning fan. As you'll see momentarily in the thermal and acoustic test results, the CNPS9500 AM2 heatsink is a
very effective thermal solution at low fan speeds. In fact, it offers just slightly cooler running temps than
the stock socket AM2 heatsink, and with significantly lower noise output.
Clip, Four K8 Processor Sockets
The complex shape of the
Zalman CNPS9500 AM2 heatsink makes the proposition of installing it onto an AMD socket AM2 processor about as
endearing as mid-terms... but the process is remarkably easy.
The heatsink comes with a single prong clip split into two parts. This
steel clip will work with socket 754/939/940 and AM2 Athlon64 motherboards.
The method of installation will depend on how the AM2 CPU socket is
oriented on the motherboard, as the manufacturer recommends that the exhaust from the Zalman CNPS9500 AM2
always be blowing towards the rear of the chassis.
We should also mention the following restrictions that
may prevent the Zalman CNPS9500 AM2 from installing correctly:
1.) No interfering components within 56mm of the
center of the CPU up or down, and none within 45mm of the center of the CPU to
the front or rear.
2.) There must be at least 135mm space above the CPU
socket in the chassis for the CNPS9500 AM2 to fit.
quick measurements will ensure that the power supply, videocard, and any optical disk drives in your computer
case are far enough away from the CPU socket.
Given the orientation, the steel clip is either threaded perpendicularly in between the copper heatpipes, or parallel to them through the
wide gap. It can be a bit tricky to thread the clip through the heatpipes, so
pay close attention to the illustrations in the manual.
Next, we'll examine the new AMD Athlon64 socket AM2
heatsink retention frame (pictured above), and discuss which kinds of socket 754/939/940 heatsinks have been made obsolete
by its four-post screw design, and which types of K8 heatsinks will remain compatible with AM2.
Get ready to toss out that high performance $60 copper behemoth...