PCSTATS     
[X]   Directory of
Guides & Reviews

Beginners Guides
Motherboards by Brand
Weekly Newsletter
Archived Newsletters

+70 MORE Beginner GUIDES....
Pencil Trick For The ATI Radeon 8500
Pencil Trick For The ATI Radeon 8500 - PCSTATS
The Radeon 8500 is an extremely fast card at stock speeds but I was excited on the thought overclocking it to make it even faster.
Filed under: Video Cards Published:  Author: 
External Mfg. Website: ATI Feb 01 2002   C. Sun  
Home > Reviews > Video Cards > ATI Radeon 8500

The Pencil Trick For The Radeon 8500


The Radeon 8500 is an extremely fast card at stock speeds but I was excited on the thought overclocking it to make it even faster. However, it turned out that my Retail ATI Radeon 8500 was a lousy overclocker, hitting its max overclock at 312 MHz core and 292 MHz memory from a stock speed of 275 MHz / 275 MHz. I thought that was all I could get until I read something at the Rage3D forums that turned out to be a little gem of a mod.

Apparently it's possible to voltage mod the Radeon8500 with a simple pencil! Well actually, I used a 4B pencil, and here is how you do it....

What you want to do is look for these two particular resistors in the red circles on the back of the ATi Radeon 8500. Once you find them, the trick is to draw a few strokes along one side of the resistor so you "short" the solder contacts and decrease the overall resistance between the points. You should be able to make out some black lines in the picture below which illustrate the idea roughly.

Now be careful, every pencil stroke you apply increases the voltage given to the GPU and memory, by decreasing the resistance! If you are lucky enough to have a Voltmeter, you should be able to measure the voltage increase between the two solder contacts at each particular resistor.

After applying the pencil trick myself (four strokes in my tests), I was able to overclock the Radeon 8500 core from my previous high of 312 MHz to 320 MHz and the memory up to 315 MHz from 292 MHz! As far as the memory is concerned, that's almost 10% more! Not a bad increase for four strokes of a pencil on each resistor in question!

Here's everyone's favorite benchmark, 3DMark2001, let's see what it thinks of this ATI Radeon 8500 card now with the GPU and memory getting a bit more juice!

test system specs:

Computer Hardware:

Processor: AthlonXP 1900+ Unlocked at 1.82 GHz
Motherboard: EPoX 8KHA+ (173 MHz FSB)
Chipset: VIA KT266A
Videocard:

ATi Radeon 8500 (275/275)
ATi Radeon 8500 (312/292) overclocked
ATi Radeon 8500 (320/315) overclocked

Network Card:

Not Used

Memory:

256 MB OCZ PC2400

Hard Drive: 10GB Maxtor DiamondMax
CDROM: Panasonic CR-594-B 48x CD-ROM
Floppy:

Panasonic 1.44 MB Floppy

Heatsink: Dragon Orb 3
PowerSupply: Enermax 550 Watt

Software Setup:

Windows 98SE
VIA 4in1 4.37
ATI Radeon 9008 beta

Benchmarks

3DMark2000 Ver 1.1

3DMark2001 Source: MadOnion

3DMark2001 is the latest installment in the 3DMark series by MadOnion. By combining DirectX8 support with completely new graphics, it continues to provide good overall system benchmarks. 3DMark2001 has been created in cooperation with the major 3D accelerator and processor manufacturers to provide a reliable set of diagnostic tools. The suite demonstrates 3D gaming performance by using real-world gaming technology to test a system's true performance abilities. Tests include: DirectX8 Vertex Shaders, Pixel Shaders and Point Sprites, DOT3 and Environment Mapped Bump Mapping, support for Full Scene Anti-aliasing and Texture Compression and two game tests using Ipion real-time physics.

Higher numbers denote better performance.

3DMark 2001 Benchmark Results
Video Card 3DMarks Ranking
1. ATi Radeon 8500 (275/275)

9120

2. ATi Radeon 8500 (312/292)

9813

3.

ATi Radeon 8500 (320/315)

10200

I'm aware that newer beta's are out for the 8500, however these tests were conducted before those drivers were released. Still, the performance boost speaks for itself, over a 400 point increase on the overclocked card! This trick helped me get my Radeon8500 past 10k in 3DMark2001 for the first time ever!

So there you have it, the pencil reigns supreme for Athlons and even ATI Radeon 8500's. Now, the first time I did this trick I applied too much carbon and there were artifacts at the post screen. With each successive stroke of the pencil, more carbon is deposited and the resistance between the solder points is lowered. It you apply too much carbon from the pencil it enables too much voltage to go to the core and you will damage the GPU and memory.

So in case it isn't completely obvious, we do not recommend you try this mod if you are unwilling to risk of damaging your video card permanently!!!

I've been using this mod to keep my own ATI Radeon card working over the norm for the last month or so, and I haven't seen any issues pop up because of it. I do not know what the long term effects to stability, or to the reliability of the memory will be, if anything. Feel free to investigate this further for yourself if this is the first time you've heard of this tweak.

A special thanks goes out to the geniuses at the Rage3D forum for having all the info! If you have any questions, I'll try to answer as many as I can in the performance area of the PCstats forums.


 

Contents of Article: ATI Radeon 8500

 
Hardware Sections 


 
PCSTATS Network Features Information About Us Contact
FrostyTech
PCSTATS Newsletter
Tech Glossary
Technology WebSite Listings
News Archives
(Review RSS Feed)
Site Map
PCstats Wallpaper
About Us
Privacy Policy
Advertise on PCSTATS

How's Our Driving?
© Copyright 1999-2023 www.pcstats.com All rights reserved. Privacy policy and Terms of Use.