Check Memory usage:
your cursor to the My Computer shortcut. then right click on it and click
on properties. You should get a window that shows how much RAM your
camputer had to begin with. Move the cursor to the tab called preformance
and click on it. From there you should be able to see how much memory you
have left (percentage wise).
Get more Bandwidth:
restart computer nd go into BIOS
setp 2: disable
anything to do with usb (ULNESS YOU USE USB)
3: restart your computer.
reason: usb allocates 12% of your bandwith for usb
devices. dependong on your system configuration this can improve frame
reates in games greatly,
example: my old k6-3
computer gained 25FPS in UNREAL TOURNAMENT by disabling usb.
this tweak does not work as great on moderm computer
running DDR or the more costly rambus, yes it still is good for 4-10% more
computers, , p2s p1's k6's etc will benefit most from this, lets face it
these older systems need all the help they can get.
on an older system where ram
bandwith is an issue, they help alot but when new computer that get
2-3GB's of bandwith, it doesnt help as much so YOUR RESULTS WILL VARY.
this is my little tweak, thank
Now, if you
want to overclock your cpu, you should look into getting a pentium 4, .1.5
GHz. Over clocking is the somewhat unknown and uncommon practice of
running your CPU (or other parts) past the speed that it is rated at. This
means, even if you purchased a cheaper lower end CPU, you can still try to
run it at a higher rate with great savings. The motherboard you choose to
support your CPU is the key. Assuming current market price for a 1.9GHz
CPU will cost you USD$400, and USD $155 for 1.5GHz CPU. You will be saving
up to at least USD$245 with their motherboard. And check out some
powerfull Vantec Coolers, its real heavy duty stuff. And a fan, (no im not
trying to advertise!) go with Vantec, you get quality coolers and fans.
Well if you havent guessed it, the more fans the better! In your
motherboard manual, find the jumper settings for the particular bus speed
and multiplier you want to use. Locate those jumpers on your motherboard
and change them to fit the jumper settings in the manual. If it says
"closed" for a jumper, then you need to have the little "shunt" placed
over the two pins for that jumper which "closes" the connection. If it
says "open" you may need to pull off the shunt. If your motherboard has a
"SoftMenu," then you can change your bus speed in the computer's BIOS.
Usually you will have to press F1 or Del to enter your BIOS while your
computer is starting up. Try to locate the CPU speed settings and rotate
through the available bus speeds until you find the one you are wanting to
try. Now run along kids!! Go for it!!
When you boot
your WinXP home box, does your system hang for a looooooong time after the
desktop appears?? You try and click on items and nothing happens? Then all
of a sudden, all those things that you clicked on during the hang start to
load and pop up?
I had this problem with my
computer, and I have seen it in others. It took me awhile to find a
solution, so I want to share it with as many as possible.....
1. Click START/RUN
2. Type msconfig
3. Click OK
4. Click the SERVICES tab
5. Scroll down to find a service called WORKSTATION
6. Uncheck this service
8. When prompted, Restart
With any luck, you will just
have cut your boot time in half, just like I did for my computer and for
When the System configuration utility
appears, if this worked for you, click the box that says "Do Not Show This
Message Again". If this causes something bad to happen, immediatly repeat
the steps above except put a check IN the box on step #6.
I cannot say if this will work
in XP Pro because I have not tested it. If anyone tries I would love to
know if it worked.
Windows Tile Trick:
This one is to
get you started,
"regedit" from Start->Run under Windows. Search the registry for
HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main\Window Title
If the Window Title string does not exist, create a new
string with that name! Edit the key value to read "Internet Explorer Provided by CHE on the loose! *Spit*
now the title which will be displayed at the top of your Internet Explorer
window. It may be kinda boring on your own machine, but it's a fun trick
to play on your friend or your boss
Can you change the window title for Outlook Express?
Windows of other programs? Try and see
Warning: Messing with your registry can hose your
operating system yadda yadda yadda...make sure you back up the registry
first and know what you are doing.
Warning #2: Screwing around
with your boss' computer can be hazardous to your career
Java Taking too long?
In IE select
tools- Internet options-advanced; under Microsoft VM'; check for Java
logging enabled and JIT compiler for virtual machine enabled. Make sure
these have a check makr and boom there u go....
Enable DMA on CD-RW's:
leading to coasters
1) you have little ram
2) many background apps running
3) YOUR DMA IS NOT ENABLED FOR YOUR BURNER!!!!!!!!!!!
enable your DMA for your burner/hard drive/anything that is IDE!! simply
goto system info in control panel, then goto your hardware device manager.
Now look for IDE ATA/Atapi controllers in your list of devices. double
click and your should see primary controller and secondary and master
your first IDE channel, and secondary your second channel, double click
primary or secondary if the device u want to enable dma is in there, then
goto advanced settings tab, and select dma if available for them all, you
usually dunt want PIO mode ever
Usually win xp
is lagging on your comp cuz u have those nice little graphics stuff that
is on by default, simply just change your desktop scheme back to classic
style, that'll take off that nice look, but boost performance =)
CD 2 CD = Coaster?
When you are
experiencing problems cd to cd copying, without first buffering an image
to the hdd, its because.
1) you have little ram
2) dma is not enabled for either of your
3) your read speed is not
at least twice as fast as your burn speed
and lastly the biggest problem: both your cd
rom/writer/drive is connected to the same IDE channel, causing loss of
data because the ide channel cannot handle all the data.
Solutiong: simply switch one
drive over to a different IDE channel
Raise your AGP Aperature Size:
There are many
reasons and many ways to solve it. If you have little system ram it could
be a problem. even if your vid card is 16mb, by getting for system ram,
you can boost overall system performance and video.
you say, "i have 256mb ram, but everything loads so
slow in gammes"
thats because you have no set your
agp arpeture size in you bios to at least have of your total memory of
your system. In this case you would set it to 128mb. Basically agp
aperture size decides how much your system memory your video card is
allowed to hog and use to cache textures, game data and other stuff.
|To solve this
problem, get a download broswer, that will cut your file into small little
pieces to download, because as you might have noticed, when your downloads
starts it fires up to 1mb/sec but after 5 sec its back to like 200kb/s,
thats probably because your isp has capped u after they detected your
bandwidth hogging transfer. Thats why you get a program that splits your
download into little pieces =) |
Unlock the T-Bird/Duron:
an AMD processor all you need to do is grab a sharp number 2 pencil. While
examing the CPU under good light you'll see a set of small gold contacts
labeled "L1" you should see a row of 8 contact that resemble dots. Get a
sharp number 2 pencil and connect each pair of dots in the same axis as
the "L1", when you are done you should have four pairs of connected dots.
Be careful not to smear lead so that it touches the other contacts. You
can also use overclockers tape (trace tape) to do this if you do not like
the idea of useing lead. Both work great, but becareful you have enough
cooling. AMD proccessors already run a little hotter than the Pentium.
when you are all done put everything back togeather (heatsink, fan,
ect.....) and boot your computer. In your BIOS you should be able to
change your clock-speed multiplier. If your machine refuses to let you
change your the multiplyer you probably didn't connect the contacts
This is so
simple it’s not funny, but it leads into the next tweak... anyway, if you
press Control+Alt+Delete, then click on the ’Processes’ tab, you should
get a dialog like the one above. You can see a list of all the processes
running at the time. Now, if you are running a program that you want to
dedicate more processing time to - eg, 3D Studio Max, as in my example,
you can just right-click on the process, move your cursor down to ’Set
Priority >’, then select how high you want that program prioritized.
While I’m checking my email, I might want a Normal priority for Max, but
if I leave my Computer, I can increass it to ’RealTime’ to get the most
rendering done. Easy!
< Previous Page
© 2017 PCSTATS.com
Please respect the time and effort that went into creating each PCSTATS Beginners Guide, do not illegally copy. Thank you.
Next Page >
||Use the power of Google to search all of PCSTATS and the PCSTATS Forums. Tell us what you think of this new feature - FEEDBACK?||