the end user the most memory tweaks I have ever seen.... There are the normal
CAS Latency and RAS timings as well as individual DIMM Driving Strength and Slew
Rate. I have no idea how to adjust most of these timing so I left them set to
its muscles here in the Genie BIOS settings.
adjust the FSB 1 MHz at a time from 200-300 MHz FSB as well as adjusting the AGP
should you want data to flow faster to the videocard. We have full multiplier
control, and there are a host of memory dividers. Of course, you'll want to run
with 1:1 memory dividers for best performance.
Overclocking enthusiasts will really like the DFI NF2 Ultra
B because there is no reason to 'volt mod' to get those high voltages to the CPU
or memory. Maximum CPU voltage is 2V, AGP 1.8V, chipset 1.9V and memory 3.3V!
who this board is targeted towards. If you don't have much experience
overclocking please stay away from those high voltage options. You can very
easily destroy your hardware if you set the power too high.