PCSTATS Main Page Follow PCSTATS on Facebook PCSTATS RSS Feed PCSTATS Twitter Feed + Motherboards
+ Videocards
+ Memory
+ Beginners Guides
News & Advanced Search  Feedback?
[X]   Directory of
Guides & Reviews

Beginners Guides
Weekly Newsletter
Archived Newsletters


Contact the Suite 66 Advertising Agency
Beginners Guides: Hard Drive Data Recovery

ECS NF650iSLIT-A nVIDIA nForce 650i Motherboard Review

ECS NF650iSLIT-A nVIDIA nForce 650i Motherboard Review - PCSTATS
Abstract: The ECS NF650iSLIT-A motherboard supports every Socket 775 processor on a 533/800/1066 MHZ FSB, from the Celeron D to the Pentium 4/D/XE series, and of course the Core 2 Duo/Quad processors.
Filed under: Motherboards Published:  Author: 
External Mfg. Website: ecs Jun 20 2007   C. Sun  
Home > Reviews > Motherboards > ecs NF650iSLIT-A

ECS NF650iSLIT-A Motherboard Gallery

If you're using a single videocard it goes into the first orange PCI Express x16 slot which is sandwiched between two PCI Express x1 expansion slots. There are three 32 bit PCI slots for legacy devices.

Two IDE connectors, the USB headers and SATA jacks are visible here. The nForce 430 Southbridge is cooled with a small passive aluminum heatsink.

ECS colour coordinates the DDR2 DIMM channels and indicates which slots must be occupied in order to enable dual channel memory. The NF650ISLIT-A natively supports a 24pin ATX power connector however it is still compatible with older power supplies. Just below that is the floppy drive connector.

Here's a close up of those tricky PCI Express x16 videocard locks. If you run two videocards in SLI, don't forget to connect the four pin molex power connector. The nVIDIA nForce 650i Northbridge generates a fair amount of heat and is cooled by a small heatsink fan setup. If you want to replace it, that is possible and there is a three pin header close by. SLi on this board will see each videocard running in x8/x8 mode, not x16/x16.

There's plenty of space around the LGA775 CPU socket so if you want to install a larger heatsink. The ECS NF650iSLIT-A only requires an ATX12V connector so if you have an older ATX1.4 spec power supply, it'll still work with the motherboard.

< Previous Page © 2020 PCSTATS.com Next Page >


Contents of Article: ecs NF650iSLIT-A
 Pg 1.  ECS NF650iSLIT-A nVIDIA nForce 650i Motherboard Review
 Pg 2.  — ECS NF650iSLIT-A Motherboard Gallery
 Pg 3.  Overclocking with the nForce 650i
 Pg 4.  Motherboard Benchmarks: Sysmark 2004
 Pg 5.  Motherboard Benchmarks: PC Worldbench (Graphics)
 Pg 6.  Motherboard Benchmarks: PC Worldbench (Office)
 Pg 7.  Motherboard Benchmarks: PC Worldbench (Data Crunching)
 Pg 8.  Motherboard Benchmarks: SiSoft Sandra, Super Pi, PCMark05
 Pg 9.  Motherboard Benchmarks: 3DMark05, 3DMark06
 Pg 10.  Motherboard Benchmarks: FarCry, Doom 3
 Pg 11.  Motherboard Benchmarks: Quake 4 / Conclusions

Use the power of Google to search all of PCSTATS and the PCSTATS Forums. Tell us what you think of this new feature - FEEDBACK?
   02 / 19 / 2020 | 5:12PM
Hardware Sections 

PCSTATS Network Features Information About Us Contact
PCSTATS Newsletter
ShoppingList Assistance
Tech Glossary
Technology WebSite Listings
PermaLink News
Archived News
Submit News (Review RSS Feed)
Site Map
PCstats Wallpaper
About Us
Privacy Policy
Advertise on PCSTATS

How's Our Driving?
© Copyright 1999-2020 www.pcstats.com All rights reserved. Privacy policy and Terms of Use.