Soltek SL-75DRV5 KT333CE Motherboard Review
With the era of the KT333 chipset and
consequently DDR333 upon us in full swing it leaves one wondering what to really
make of it all. The numbers 333 are being uttered with almost as much fervor as
XP is. Has 333 just become another meaningless marketing adjective, or is it
really a sign of wondrous things to come?
Unlike previous chipset advances, the first
experience we have had with the KT333 chipset on MSI's KT3 Ultra-ARU (chocked
full of many features in its own right) is less than that of expectation. With
the onslaught of KT333-based motherboards was around the corner would a second
look at the KT333 chipset impress us a little more?
The Soltek SL-75DRV5 has the rather pretty purple PCB
which contrasts the slew of black
and red which seem to predominate the industry as more and more motherboard manufacturers are
trying to identify themselves by the colour of their PCB. With a
retail price hovering around $150 CDN, this is easily one of the least expensive KT333 based
motherboards available to consumers.
Ships with the following:
- IDE ATA66/100 Cable
- FDD Cable
- Driver CD
- User Manual
- Quick Start Guide
- Thermal sensor
- USB Header bracket
The SL-75DRV5 has a
pretty clean layout, with a 4x AGP slot and five 32bit PCI slots
there should be ample room for expansion cards. The CNR is located at the bottom of
the board so it remains out of the way.
The three 184-pin DIMM slots accept up to 3GB of non-ECC PC1600/PC2100/PC2700 DDR RAM.
I don't particularly like to see the ATX power connector behind the game ports,
but I do realize that it is there for a reason so the power regulators
on the motherboard get a cleaner power signal.
The SL-75DRV5 comes with onboard audio using VIA's AC'97 software codec. While
you guys know it's something I don't personally like, it's understandable from
Soltek's point of view. The placement of the IDE connectors really irked
me quite a bit because the IDE ribbon cables could interfere with the
videocard. During testing we had to wrap the IDE cable around the videocard
which caused quite a hot spot! You shouldn't have a problem placing full length
PCI cards in PCI slots two through five.
all is not lost, you can easily cool almost any component on the
Soltek because it comes with no less then five fan headers! Yes, that is not a typo, there
are five fan headers, and all are easily accessible or in ideal locations (such as under the AGP
slot for a videocard). Incidently, the video card does not need to be removed should you want to add
or remove system memory.
Minor memory issues
The SL-75DRV5 didn't seem
to like it when all three DIMM slots were occupied. With three 256MB PC2100 DIMM's,
the boards stability was so-so at best, able to pass office based benchmarks. In 3D benchmarks it would often
crash back to desktop.
If you look at the board closely, you'll see two set
of dip switches, the ones closer to the CPU socket are for multiplier adjustment and the ones near
the IDE ports are for FSB. It is possible to adjust the FSB in
the BIOS itself, however the multiplier controls are strictly left to dip switches which is a royal
pain in overclocking adventures.
Yet another piece of evidence that AMD is
going to move its CPU FSB up to 166 MHz, the SL-75DRV5 has a diagram on the PCB
showing a 166 MHz FSB! Unfortunately that option didn't work, selecting a CPU FSB
of 166 MHz got us only 133 MHz FSB. AGP and DRAM voltage can be adjusted but again,
it's through jumpers only.
||Use the power of Google to search all of PCSTATS and the PCSTATS Forums. Tell us what you think of this new feature - FEEDBACK?|